start
 
 
Technical Support
The ultimate UNICAM DEVELOPMENT TEAM
Best choice for best CAM solutions
Start

Compatibility List:
Deltacam TWIN
Unicam HW v4.0
 Unicam HW v3.0
- TV Liste new!!!
- Receiver Liste new!!!
- DVB-PC Card new!!!
  Unicam old HW
- TV Liste new!!!
- Receiver Liste new!!!
- DVB-PC Card new!!!

Tools&HowTo
Deltacam
Unicam
Programmer

Download area
Deltacam TWIN
Unicam HW v4.0
Unicam HW v3.0
Unicam HW v2.0
Unicam HW v1.0
Programmer

Technical Support
Download DELTACAM TWIN module FW
 
ATTENTION: This Firmware is for use with DELTACAM TWIN HW v1.0 and v2.0!!!
Flashing DELTACAM TWIN HW v2.0 is possible only with the
"DeltaFlash Loader v1.38" from DELTACAM Download Area!!!!
download Cobra v01.57
(03/03/2014)
  • fixed descrambling of CSat smartcard on HD channels
download Python v01.57
(03/06/2014)
  • fixed descrambling of CSat smartcard on HD channels
download Cobra v01.56
(27/05/2014)
  • fixed a bug on editing keys and not allowing further changes
  • fixed KD K02 smartcard reading
  • rearranged CAM's menu for smartcards
  • fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
  • improved seca EMM handling in case of 2 or more providers used together in the same card
  • fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
download Python v01.56
(27/05/2014)
  • fixed KD K02 smartcard reading
  • rearranged CAM's menu for smartcards
  • fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
  • improved seca EMM handling in case of 2 or more providers used together in the same card
  • fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
download Cobra v01.55
(07/04/2014)
  • fixed NDS sky de v13 smartcard with Fastmode+ enabled
download Python v01.55
(07/04/2014)
  • fixed NDS sky de v13 smartcard with Fastmode+ enabled
download Cobra v01.53
(07/04/2014)
  • fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
  • fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
  • support for hardware 2.0
  • fixed a bug with MTD on Kathrein STBs
  • added support for 8x MTD channels
download Python v01.53
(07/04/2014)
  • fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
  • fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
  • support for hardware 2.0
  • fixed a bug with MTD on Kathrein STBs
  • added support for 8x MTD channels
download Deltacrypt
(16/09/2013)
  • Deltacam factory SW for HW v2.0
download cobra_01.52
(21/03/2014)
  • fixed a bug on TNTsat emulator
  • improved dynamic CAID management in case of betacrypt smartcards
  • improved EMM handling for Viaccess smartcards
  • d a bug not showing the CAM settings menu
  • d SRG Viaccess emulator
download python_01.52
(21/03/2014)
  • improved dynamic CAID management in case of betacrypt smartcards
  • improved EMM handling for Viaccess smartcards
  • fixed a bug not showing the CAM settings menu
download cobra_01.51
(17/03/2014)
  • TNT SAT Emu working again, including HD!
download python_01.51
(17/03/2014)
  • TNT SAT SmartCards working again, including HD!
download cobra_01.50
(05/03/2014)
  • added dynamic CAID management
  • fixed Sky Germany S01 smartcard recognization
  • fixed TeleColumbus smartcard recognization (only SD channels are working, HD channels use pairing)
  • fixed crash on many devices when entering in the emu keys editor menu
  • fixed crash on entering the "Pid Info" menu when using different languages than English
  • fixed crash on some devices when entering big entitlements menus
  • added boxid value on the NDS smartcard info menu
download python_01.50
(05/03/2014)
  • added dynamic CAID management
  • fixed Sky Germany S01 smartcard recognization
  • fixed TeleColumbus smartcard recognization (only SD channels are working, HD channels use pairing)
  • fixed crash on entering the "Pid Info" menu when using different languages than English
  • fixed crash on some devices when entering big entitlements menus
  • added boxid value on the NDS smartcard info menu
download cobra_01.45
(13/02/2014)
  • added Viasat SoftNDS emulator
  • fixed a little bug on MMI showing the wrong option selected in the language and age rating menu
  • added Viasat NDS smartcard caid (093E and 090F) in default caid list of the CAM
download python_01.45
(13/02/2014)
  • fixed a little bug on MMI showing the wrong option selected in the language and age rating menu
  • added Viasat NDS smartcard caid (093E and 090F) in default caid list of the CAM
download cobra_01.42
(27/01/2014)
  • fixed Digiturk cryptoworks emulator (SD channels)
download python_01.41
(27/01/2014)
  • fixed a bug on MMI when having big amount of entitlements on Irdeto
  • fixed a bug on bad interpretation for validity of CWs for NDS smartcards
  • added NDS fast mode on the MMI menu and removed it from the modbox file
  • added the possibility to change alternative compatibility mode from the CAM's menu
  • fixed the reading of serial numbers (in decimal like on the smartcard back) for smartcards on: Viaccess, Conax, Cryptoworks, Irdeto, NDS, Nagravision and Seca
  • added smartcard's mature rating menu for Viaccess smartcards
download cobra_01.40
(08/01/2014)
  • CSat smartcards SECA 3 pairing on HD channels (nano 01)
  • Fransat smartcards reading support
  • Telenet (Belgium) emulation
  • added emulator keys editor as option in the CAM's menu (for editing keys you need to flash softcam.key with the new version of flash loader 1.36 software. If you flashed keys with a previous version you will not be able to edit keys but the emulator will still work)
  • fixed a bug on selecting correctly the ecm PID when using Constant DW
  • fixed another bug for recognization on some Philips TVs (please select "Enable alternative compatibility mode" when you flash new firmware with the software loader in TVs that had problem)
  • fixed Blankom DRD 700 headend compatibility
  • fixed a bug with funcard reset
  • fixed entitlements reading for ICE smartcards in Irdeto mode
  • fixed entitlements showing for Conax smartcards
  • fixed a bug that was stopping the smartcard to run after about 1 minute (happening especially on RedLight channels)
download python_01.40
(08/01/2014)
  • CSat smartcard SECA 3 pairing on HD channels (nano 01)
  • Fransat smartcards reading support
  • fixed another bug for recognization on some Philips TVs (please select "Enable alternative compatibility mode" when you flash new firmware with the software loader in TVs that had problem)
  • fixed Blankom DRD 700 headend compatibility
  • fixed a bug with funcard reset
  • fixed entitlements reading for ICE smartcards in Irdeto mode
  • fixed entitlements showing for Conax smartcards
  • fixed a bug that was stopping the smartcard to run after about 1 minute (happening especially on RedLight channels)
download cobra_01.27
(16/09/2013)
  • fixed a bug on filtering CAT
  • fixed an issue with few Canaal Digital seca smartcards rev
  • improved serial number printing on the CAS menu (though it could still not being perfect)
  • improvements on the ecm pid selection (the method how each ecm pid is selected and tried)
  • added ziggo provider support (still need to be tested)
  • added alphacrypt simulator mode (it must be used for MTD on few old receiver or not anymore supported, that are checking for alphacrypt compatibility mode)
  • improved NDS smartcard support
  • fixed a bug on cryptoworks EMM/updates
download python_01.27
(16/09/2013)
  • fixed a bug on filtering CAT
  • fixed an issue with few Canaal Digital seca smartcards rev
  • improved serial number printing on the CAS menu (though it could still not being perfect)
  • improvements on the ecm pid selection (the method how each ecm pid is selected and tried)
  • added ziggo provider support (still need to be tested)
  • added alphacrypt simulator mode (it must be used for MTD on few old receiver or not anymore supported, that are checking for alphacrypt compatibility mode)
  • added alphacrypt simulator mode (it must be used for MTD on few old receiver or not anymore supported, that are checking for alphacrypt compatibility mode)
  • improved NDS smartcard support
  • fixed a bug on cryptoworks EMM/updates
download cobra_01.25
(16/09/2013)
  • fixed a bug on cryptoworks emulator (digiturk is working again)
  • added caid list in the debug menu
  • added smartcard resets counter for checking smartcards errors in debug menu
  • added possibility to use 2 different compatibility booting method for the firmware (you must use deltacam flash loader v1.32 and next versions). This is useful for some TVs like Philips 42PFL8404H/12 and Philips 40PFL6636K, so the suggestion is to try both compatibility method and choose the best for your TV/STB
  • improved entitlements reading on CAM's menu
  • fixed glitches on Sky German channels with Humax iCord HD STB
  • fixed a bug on seca smartcards activation
  • fixed a bug on few crytpoworks cards that weren't working properly
  • caid rearrangement
download python_01.25
(16/09/2013)
  • added caid list in the debug menu
  • added smartcard resets counter for checking smartcards errors in debug menu
  • added possibility to use 2 different compatibility booting method for the firmware (you must use deltacam flash loader v1.32 and next versions). This is useful for some TVs like Philips 42PFL8404H/12 and Philips 40PFL6636K, so the suggestion is to try both compatibility method and choose the best for your TV/STB improved entitlements reading on CAM's menu
  • fixed glitches on Sky German channels with Humax iCord HD STB
  • fixed a bug on seca smartcards activation
  • fixed a bug on few crytpoworks cards that weren't working properly
  • caid rearrangement
download Deltacrypt
(16/09/2013)
  • Deltacrypt factory SW